Understanding Your Electricity Supply
Where your responsibility starts, who owns what, and who to call when the problem is not yours.
People generally know where the consumer unit is. Rather fewer know what sits before it, who owns it, or who to call when the problem is on that side.
It is worth understanding, because it determines who fixes what — and because calling the wrong party wastes a day.
What sits before your board
Working from the street inwards:
The service cable brings electricity from the distribution network to your property. It belongs to the distribution network operator.
The cut-out and main fuse is where the service cable terminates. It contains the main fuse protecting the whole installation. It belongs to the network operator, and it is sealed — it is not yours to open, and interfering with the seal is an offence.
The meter belongs to your supplier, which is the company you pay. It is also sealed.
The meter tails run from the meter to your consumer unit. These are generally the consumer's responsibility.
The consumer unit onwards is yours.
Supplier and network operator are not the same
This confuses almost everyone, and it matters.
Your supplier sells you electricity. You chose them, you can switch, and they deal with billing and metering.
Your distribution network operator owns the cables and equipment delivering electricity to your area. You did not choose them and cannot switch — they are determined by geography. They deal with supply faults, power cuts, and supply upgrades.
If your power is off and your neighbours' is too, it is a network operator matter, not a supplier one. In Great Britain you can call 105 free from most phones and be connected to the right operator.
The main fuse
The rating of your main fuse sets the ceiling on what your property can draw. In many homes it is 60A, 80A or 100A.
It matters when adding significant load — an EV charge point, electric heating, an electric shower. A property with a 60A main fuse has considerably less headroom than one with 100A.
Only the network operator can change it, and it involves an application. It is not something an electrician can simply swap.
The earthing arrangement
How your installation is connected to earth varies, and it affects what protective measures are required — particularly for outdoor circuits and vehicle charging.
It is determined at the supply position, established by testing, and not something that can be assumed from the age or type of the property.
Who to call
- No power, neighbours also affected: network operator — call 105.
- No power, only your property, main fuse suspected: network operator.
- Damage to the cut-out, meter or their seals: network operator or supplier. Do not touch it.
- Meter or billing: your supplier.
- Anything from the consumer unit onwards: an electrician.
If you are not sure
Describe what is happening and we will tell you whose problem it is — including when it is not ours.
Keep reading
Related guides
Why Does My Circuit Breaker Keep Tripping?
A breaker that trips is doing its job. Understanding which of three faults it is reporting tells you how seriously to take it.
Domestic Electrical Safety: What to Check at Home
A short, practical list of things worth noticing in your own home — none of which require tools or any risk to you.
What an EICR Is, and What the Codes Actually Mean
Electrical Installation Condition Reports are full of codes that decide whether you have a problem. Here is how to read one.