Skip to main content
BeydilliBright
Call

Frequently asked questions

Electrical questions, answered

Straight answers to the questions we are asked most often — about installations, repairs, consumer units, CCTV, fire alarms, lighting, EV charging and electrical safety.

Getting started

Call 07832450917, email info@beydillibright.com, or send an enquiry through the contact page. Tell us what the property is, what needs doing and roughly when you are hoping to have the work carried out. Some jobs can be priced from that description; others need looking at first, and we will say which yours is.

Electrical safety

Treat it as urgent. Stop using the affected circuit and, if it is safe to do so, switch it off at the consumer unit. A burning smell around electrical equipment usually means a connection is overheating, and overheating connections are a fire risk. Do not wait to see whether it happens again — get it looked at.

Consumer units and fuse boxes

They are the same thing. "Fuse box" is the everyday term and "consumer unit" is the technical one. Both describe the board where the incoming supply is divided into circuits and protected. What has changed over the decades is how much protection that involves.

Related: Fuse Box / Consumer Unit Installation

Domestic electrical work

The reliable indicators are test results rather than appearance. Widespread low insulation resistance readings, rubber or fabric-insulated cable, and an installation that has reached the end of its serviceable life all point that way. Age alone does not — plenty of sixty-year-old installations test perfectly well.

Related: Domestic Electrical Services

Commercial electrical work

Yes, and for most commercial premises that is the only practical arrangement. Tell us your trading hours and any access constraints at the first conversation, because they shape the programme rather than being fitted around it afterwards.

Related: Commercial Electrical Services

Faults and repairs

Three common causes: an overloaded circuit, a short circuit, or earth leakage. A breaker that trips once and resets cleanly may have been a one-off — an appliance failing, for instance. One that trips repeatedly is reporting a fault, and resetting it repeatedly is not a fix.

Related: Electrical Services

CCTV and security

Fewer than most people expect, positioned better than most systems are. Four well-placed cameras will tell you more than twelve installed without a plan. The number follows from what you need to see — identification at entry points is a different requirement from general area coverage.

Related: CCTV Installation

Fire alarm systems

That should come from the fire risk assessment for the building, which considers its layout, use and occupants. Specifying a system without one is guesswork. If you do not have a current assessment, that is the place to start rather than the system.

Related: Fire Alarm Systems

Lighting

Almost always because the dimmer and the LED driver are not compatible. Older dimmers designed for filament lamps frequently do not work properly with LED loads. The fix is matching the dimmer to the fittings — and it is far easier to get right at specification than after installation.

Related: Lighting Systems

EV charging

If you have off-street parking, usually yes. The factors that decide it are the incoming supply, the main fuse rating, the condition and capacity of the consumer unit, the earthing arrangement, and the route from the board to where the charge point will go.

Related: EV Charger Installation

Areas and coverage

We are based in Enfield and work across London and the surrounding areas. The areas page lists the boroughs we have written pages for — that reflects our published content rather than the limit of our coverage. If your postcode is not listed, call and ask.

Our own photography

What the work looks like

Our own photographs of completed installations.

Full gallery
A newly installed consumer unit with the cover removed, showing neatly dressed earth, neutral and line conductors terminated into the busbars above two RCDs and a row of circuit breakers
New consumer unit, fully populated
An MK Sentry consumer unit with its cover open, showing a main switch, two RCDs and circuit breakers above a clearly labelled circuit chart
RCD-protected board with labelled circuits
A bedroom with a circular flush ceiling light and two wall-mounted uplighters casting warm light up and down the wall, with a bay window to the left
Bedroom lighting scheme
Two slim wall lights throwing light upwards and downwards onto a white wall, beneath a ribbed circular ceiling light
Wall uplighters and flush ceiling fitting

Call us

Speak to an electrician

Describe the fault or the job and we will tell you what is involved.

07832450917 Request a quote