A Practical Guide to CCTV Installation
Four cameras in the right places beat twelve in the wrong ones. Here is how the right places get decided.
BeydilliBright Ltd. — London and the surrounding areas
Service
CCTV installation, system setup, upgrades and maintenance for homes and commercial premises across London — planned around what you actually need to see.
A CCTV system is only as good as the thinking behind where the cameras go. Four cameras positioned properly will tell you more than twelve installed without a plan — and a system that records footage nobody can identify anyone from has cost money without solving the problem.
The starting point is what you are trying to achieve. Deterrence, monitoring a specific area, identifying people at an entrance and covering a wide open space are four different objectives, and they call for different cameras in different positions at different resolutions.
The practical questions follow from that: where the natural approach routes are, where the light comes from at different times of day, what happens after dark, and where cable can realistically be run.
Installation covers mounting and aligning cameras, running and terminating cable, installing the recorder and its storage, and configuring the system so it records what you need at a quality that is actually useful.
Cabled systems are, in most cases, the more reliable choice for a permanent installation. Wireless has its place — particularly where cabling is genuinely impractical — but it introduces dependencies that a hard-wired system does not have.
Recording is only half of it. Retention periods, motion detection zones, notification settings and remote viewing all need configuring so the system fits how you will actually use it.
Remote access is straightforward to set up but deserves care: default passwords left unchanged are the single most common weakness in domestic and small commercial CCTV.
Older analogue systems can often be improved substantially without being replaced entirely. Where a full replacement is the sensible route, existing cable routes can frequently be reused, which reduces the disruption considerably.
Cameras drift out of alignment, lenses get dirty, weather seals degrade and hard drives fail — usually silently. A system nobody has checked for two years is often not recording at all. Periodic maintenance checks the images, the recording, the storage and the physical condition of the equipment.
CCTV that captures areas beyond your own property boundary brings data protection obligations under UK GDPR, including signage and handling requests for footage. Commercial systems have further responsibilities. We will flag where this is likely to apply to your installation, but you should take your own advice on compliance.
Tell us about the property and what you want the system to cover, and we will explain what it would involve.
Fewer than most people expect, positioned better than most systems are. Four well-placed cameras will tell you more than twelve installed without a plan. The number follows from what you need to see — identification at entry points is a different requirement from general area coverage.
Related: CCTV Installation
At the points where someone actually approaches, at a height where a face is captured rather than the top of a head. Mounting cameras high and looking down is common and produces footage in which nobody can be identified — which defeats the purpose of having them.
Related: CCTV Installation
For a permanent installation, wired is generally more reliable: no dependency on wireless signal quality, and power and data in one run. Wireless has its place where cabling is genuinely impractical, but it introduces failure modes a hard-wired system does not have.
Related: CCTV Installation
Only as long as there is a reason to keep it. Retention should be proportionate to the purpose — commonly a few weeks for general security. Keeping footage indefinitely creates a data protection liability without adding much practical benefit.
Related: CCTV Installation
Yes, remote viewing is standard on modern systems. The thing worth insisting on is that the default password is changed during setup — unchanged default credentials are the single most common weakness in domestic and small commercial CCTV, and remotely accessible cameras are actively scanned for.
Related: CCTV Installation
If your system captures areas beyond your own property boundary, data protection obligations apply and signage is part of that. For commercial premises the requirements go further. We will flag where this is likely to apply, but you should take your own advice on compliance.
Related: CCTV Installation
It can, but doing so brings your system within UK GDPR, with obligations including signage and responding to requests for footage. On terraced and semi-detached streets this comes up more often than people expect, and it is worth taking into account when positioning cameras.
Related: CCTV Installation
Frequently, yes, and existing cable routes can often be reused — which keeps both disruption and cost well below a fresh installation. Where a system is old enough that the cabling itself is the limitation, we will tell you rather than fitting new cameras onto infrastructure that cannot support them.
Related: CCTV Installation
Four cameras in the right places beat twelve in the wrong ones. Here is how the right places get decided.
You rarely need to start again. Existing cable routes are usually the most valuable part of an old system.
Cameras, lighting, alarms and access control do different jobs. Designed together they work; bought separately they usually do not.
Call us
Describe the fault or the job and we will tell you what is involved.
Keep exploring