Electrical Safety and Older People at Home
Small electrical changes make a disproportionate difference to how safe and usable a home is as people get older.
Most homes are wired for the person who moved in, not the person who is still living there thirty years later. A few modest electrical changes make a genuine difference to how safe and usable a house is as mobility, sight and dexterity change.
None of these are expensive. Most are a morning's work.
Lighting is the biggest single factor
Vision changes with age: more light is needed, glare becomes more troublesome, and adapting between bright and dark takes longer.
What helps:
- Brighter general lighting, particularly on stairs, in hallways and in kitchens.
- Even light levels, because pools of light and dark are harder to navigate than a consistently lit space.
- Good colour rendering, which makes edges, steps and level changes easier to see.
- Light at the top and bottom of stairs, with two-way switching so neither end requires walking in the dark.
- Night lighting on the route between bedroom and bathroom — low-level or automatic, so nobody has to find a switch at 3am.
Falls at night are common and largely preventable, and lighting is the cheapest intervention available.
Socket height
Sockets at skirting level require bending down, which becomes difficult and, for someone unsteady, genuinely risky.
Raising sockets to around 450–500mm makes them reachable without bending. Lowering switches slightly helps anyone seated. Both are straightforward to do when a room is being redecorated anyway.
Switches that are easy to use
Rocker switches are easier than small toggles for anyone with reduced dexterity or arthritis. Larger plates are easier to find. Switches that contrast with the wall are easier to see.
These are small specification choices that cost nothing extra.
Outdoor lighting
The path from the gate to the front door, and the front door itself, should be lit. A motion-activated light at the entrance means never fumbling with keys in the dark.
Steps and level changes deserve particular attention — see our article on outdoor lighting.
RCD protection
More important, not less, where anyone in the household is more vulnerable to the effects of a shock. If the consumer unit has no RCD protection, upgrading it is the most valuable single change available.
Reduce the extension leads
Trailing leads are a trip hazard, and trip hazards matter far more as people become less steady. Adding sockets where things are actually plugged in removes the leads, which removes the hazard.
Label the consumer unit
Clear labelling means that when something trips, the right switch can be found quickly and without a torch and a process of elimination.
Smoke alarms
Interlinked mains alarms are considerably more reliable than battery units, and they remove the problem of a chirping alarm in an inaccessible position. Alarms with a strobe or a vibrating pad are available where hearing is a concern.
Worth doing together
Most of these can be done in one visit. If you are arranging work for a parent or relative, tell us what the concerns are and we will suggest what makes the most difference.
Keep reading
Related guides
Domestic Electrical Safety: What to Check at Home
A short, practical list of things worth noticing in your own home — none of which require tools or any risk to you.
What an EICR Is, and What the Codes Actually Mean
Electrical Installation Condition Reports are full of codes that decide whether you have a problem. Here is how to read one.
Common Electrical Problems in London Homes
London’s housing stock produces a recognisable set of electrical problems. Here are the ones we see most often, and why.