Skip to main content
BeydilliBright
Call
Maintenance

Preparing a Property to Let: The Electrical Checklist

A void period is the cheapest time to do electrical work. Here is what is worth doing while the property is empty.

BeydilliBright Ltd. 3 min read
A long open-plan room under refurbishment with a linear wall light, several pendant fittings and downlights switched on, leading to glazed doors onto a garden

An empty property is the cheapest property to work on. No appointments, no working around someone's life, no restrictions on which rooms can be out of use.

If a property is between tenancies, this is the window. Here is what is worth doing in it.

Get the inspection done first

An Electrical Installation Condition Report establishes the actual condition and tells you what has to be addressed. Doing it first means the remedial work can be planned as one piece of work rather than discovered progressively.

Private rented property in England requires inspection at intervals of no more than five years, so this is a requirement rather than an optional extra.

Address C1 and C2 items

These make a report unsatisfactory and must be addressed. Do them together — several observations frequently share a root cause, and dealing with them as one job is quicker and cheaper than three visits.

Consider the C3 items too

Recommendations rather than requirements, and easy to defer. The argument for doing them now is that they are the items most likely to become C2 at the next inspection as standards move on — and during a void they cost a fraction of what they cost under a deadline.

The consumer unit

If the board has no RCD protection, a void period is the right time to replace it. It is the single most effective safety improvement available, it is disruptive with a tenant in place, and it is likely to be flagged eventually anyway.

See our consumer unit page for what the work involves.

Smoke and carbon monoxide alarms

Check that provision meets current requirements, that alarms function, and — importantly — that they are not approaching the end of their service life. Most have a stated lifespan of around ten years regardless of whether they still respond to the test button.

Interlinked mains-powered alarms are considerably more reliable than battery units, which tenants remove when they beep at night.

Sockets and accessories

Walk the property and look at every socket and switch: cracked faceplates, loose fittings, discolouration, scorch marks. These are cheap to replace while empty and become call-outs once occupied.

Also count them. A property where tenants will inevitably use extension leads in every room is a property that needs more sockets, and adding them now is the easy moment.

Outdoor circuits

Garden lighting, outdoor sockets, supplies to sheds and garages. Check enclosures and seals, and check that RCD protection is present — outdoor circuits should have it without exception.

Informal arrangements added by a previous occupant, such as an extension lead running to a shed, should be replaced with a proper supply or removed.

Label the board

Small thing, disproportionate value. A clearly labelled consumer unit means a tenant can identify and reset a tripped circuit rather than calling you about it.

Leave the paperwork

Inspection report, certificates for work carried out, alarm test records. Give copies to the tenant and keep your own set together.

They are needed more often than you expect, and always at short notice.

Keep reading

Related guides

Call us

Speak to an electrician

Describe the fault or the job and we will tell you what is involved.

07832450917 Request a quote