Does My House Need Rewiring?
Rewiring is decided by test results, not by the age of the house. Here is what actually indicates it.
"The house is sixty years old, so it probably needs rewiring" is one of the most common assumptions we encounter, and it is wrong roughly as often as it is right.
Age is a reason to test. It is not, by itself, a reason to rewire.
What actually indicates a rewire
Test results, principally
The decisive evidence is insulation resistance across the installation. If readings are low across many circuits, the insulation has deteriorated broadly and the wiring has reached the end of its serviceable life.
If readings are good, the wiring is doing its job regardless of how long it has been there.
Cable type
Rubber-insulated cable, lead-sheathed cable or fabric-covered cable indicates an installation from a period when those materials were standard. Rubber in particular becomes brittle and crumbles, often at terminations where it has been disturbed.
Early PVC from the 1960s onwards generally ages far better, and plenty of it tests well.
No earthing on lighting circuits
Older lighting circuits were frequently installed without a protective conductor. That limits what fittings can be installed and is a genuine constraint, though it can sometimes be addressed circuit by circuit rather than by rewiring everything.
Round-pin sockets
These indicate wiring likely to date from before the 1960s. Not automatically dangerous, but an installation of that age warrants testing before any conclusion is drawn.
What does not indicate a rewire
- An old consumer unit. That is a board replacement, which is a much smaller job.
- Not enough sockets. That is adding circuits.
- A circuit that trips. That is a fault to find.
- Age alone. Test it.
It is worth being alert to this, because "you need a full rewire" is occasionally the answer given when a smaller job is what is actually required.
Partial rewiring
Far more common than full rewiring, and frequently the right answer. Specific circuits, a floor, or a particular area — a kitchen being refitted, an extension, the upstairs lighting.
Where testing shows that some circuits have deteriorated and others are sound, replacing the affected ones is proportionate and sensible.
What a full rewire involves
It is genuinely disruptive. Floors up, walls chased, and redecoration afterwards — the making good is a substantial part of both the cost and the timescale, and it is often underestimated when people budget.
In an occupied house it is hard going. In an empty property, between tenancies or during a wider refurbishment, it is far faster and cheaper.
Timing
If a rewire is on the horizon and a refurbishment is planned, do them together. The building is open, the making good is happening anyway, and the incremental cost is a fraction of doing it as a standalone job later.
Find out where you stand
An inspection and test tells you the condition of the installation, which is the only sound basis for deciding. It also tells you what needs attention regardless of whether a rewire is in your future.
See our domestic electrical services page.
Keep reading
Related guides
Domestic Electrical Safety: What to Check at Home
A short, practical list of things worth noticing in your own home — none of which require tools or any risk to you.
Common Electrical Problems in London Homes
London’s housing stock produces a recognisable set of electrical problems. Here are the ones we see most often, and why.
Electrical Considerations Before a Loft Conversion
Loft conversions run into the same electrical surprise again and again — and it is one that is much cheaper to find at design stage.