Upgrading an Older CCTV System
You rarely need to start again. Existing cable routes are usually the most valuable part of an old system.
Plenty of properties have a CCTV system installed years ago and never revisited. The images are poor, the recorder is unreliable, and nobody has looked at it in a long time.
The assumption is that the whole thing has to be replaced. Often it does not — and the reason is that the expensive part of a CCTV installation is not the cameras.
The cable is the asset
Getting cable from a recorder position to a camera position is most of the work in any CCTV installation. It means routes through walls and ceilings, external runs, and making good afterwards.
If that has already been done, an upgrade becomes a very different proposition. Existing coaxial cable can often carry modern high-definition analogue signals, which allows a substantial image quality improvement using the cable that is already there.
Where the existing cabling is structured cable, an upgrade to IP cameras is straightforward for the same reason.
What is actually wrong with the old system?
Worth diagnosing before deciding, because the answer varies:
Poor image quality. Usually the cameras, sometimes the recorder, occasionally the position. Cameras positioned badly produce poor footage at any resolution, and replacing them without moving them changes nothing.
Not recording. Very often a failed hard drive. Drives in continuously recording systems have a finite life, and when they fail the system frequently gives no obvious indication.
No remote access. Common on older systems, and one of the more compelling reasons to upgrade.
Cameras have stopped working. Water ingress through perished seals, or damage to external cable.
Revisit the positions
An upgrade is the right moment to ask whether the original positions were sensible, because they frequently were not. The classic case is cameras mounted high under the eaves, producing wide views in which nobody can be identified.
Moving one camera to head height at an entry point often improves a system more than doubling its resolution.
Mixing old and new
Some recorders accept both older analogue and newer high-definition analogue cameras, which allows a phased upgrade — replacing the cameras that matter most first and the rest later.
That is a genuinely useful option where budget is a constraint, and worth asking about rather than assuming an all-or-nothing replacement.
Security of the new system
Older systems were often installed before anyone thought about network security. If you are upgrading to an internet-connected system, insist that default credentials are changed, that firmware is current, and that you know how to update it later.
Have yours looked at
If you have a system that has stopped being useful, an assessment establishes what can be reused and what genuinely needs replacing. That is usually a cheaper conversation than people expect. See our CCTV page.
Keep reading
Related guides
A Practical Guide to CCTV Installation
Four cameras in the right places beat twelve in the wrong ones. Here is how the right places get decided.
Security Systems: Layers That Work Together
Cameras, lighting, alarms and access control do different jobs. Designed together they work; bought separately they usually do not.
CCTV and Data Protection: What Homeowners Should Know
A domestic camera pointing at the pavement brings legal obligations. In London, that happens more often than people realise.