Skip to main content
BeydilliBright
Call
CCTV and security

A Practical Guide to CCTV Installation

Four cameras in the right places beat twelve in the wrong ones. Here is how the right places get decided.

BeydilliBright Ltd. 3 min read
A boxed Wi-Fi video doorbell with HD video and two-way audio held in front of a white panelled door

Most CCTV systems that disappoint their owners do so for the same reason: nobody decided what the system was for before deciding where the cameras went.

The question is not how many cameras. It is what you need to be able to see, and where.

Start with the objective

There are four distinct objectives, and they need different things:

  • Deterrence. The camera needs to be visible. Resolution matters less.
  • Monitoring. Watching an area in general terms — a yard, a car park.
  • Recognition. Identifying someone you already know.
  • Identification. Capturing a face clearly enough to identify a stranger.

Identification is by far the most demanding, and it is what people assume they are getting. It requires a camera close to the subject, at roughly head height, at the point they pass — not a wide view from under the eaves.

Position beats specification

The most common installation error is mounting cameras high and pointing them down. It covers a wide area and produces footage in which every person is a hooded shape seen from above.

A camera at head height covering a doorway or a gate — a place people must pass through — produces genuinely useful footage. One well-positioned identification camera at each entry point, supported by wider monitoring views, is a better system than a dozen general views.

Light

Night performance depends more on position than on the camera. Infrared illumination has a limited effective range, and a camera pointing towards a bright light — a street lamp, a security floodlight, a west-facing view at sunset — will struggle regardless of specification.

Where lighting and cameras are both being installed, designing them together produces a far better result.

Wired or wireless

For a permanent installation, wired is generally the better choice: power and data in one run, no dependency on wireless signal quality, no battery to manage.

Wireless is a reasonable answer where cabling is genuinely impractical, but it adds failure modes a hard-wired system does not have — and those failures tend to be silent.

Recording and retention

Decide how long you need footage kept, and configure storage accordingly. Retention should be proportionate — commonly a few weeks. Keeping footage indefinitely creates a data protection liability without adding much practical benefit.

Motion detection zones are worth configuring properly. A camera set to record on any motion, pointed at a road, will fill its storage with passing traffic and overwrite the night you actually needed.

Remote access, and the password

Remote viewing is standard now. The one thing to insist on at handover is that default credentials have been changed. Unchanged default passwords are the most common weakness in domestic and small commercial CCTV, and internet-facing cameras are actively scanned for them.

Data protection

A domestic system capturing beyond your own boundary — the pavement, a shared driveway, a neighbour's garden — brings obligations under UK GDPR, including signage and responding to requests for footage. On terraced and semi-detached streets this comes up more often than people expect.

Commercial systems carry further responsibilities. We will flag where this is likely to apply; take your own advice on compliance.

Maintenance

Cameras drift, lenses get dirty, seals perish and hard drives fail silently. Systems nobody has checked in two years are frequently not recording at all — discovered, invariably, at the worst possible moment.

See our CCTV page, or call to discuss a specific property.

Keep reading

Related guides

Call us

Speak to an electrician

Describe the fault or the job and we will tell you what is involved.

07832450917 Request a quote