Skip to main content
BeydilliBright
Call

Barnet

Consumer Unit Replacement in Barnet

Fuse box and consumer unit replacement across Barnet, from Finchley terraces to the larger properties of Totteridge and Mill Hill.

Barnet's size means consumer unit work here spans a wider range than in most boroughs — and the right answer differs considerably between a two-bedroom flat in North Finchley and a large detached house in Totteridge.

Board capacity is the recurring issue

Barnet has seen a great deal of extension work: loft conversions, side returns and rear extensions across Finchley, Hendon and Edgware. Each one adds circuits, and a board installed when the house had far fewer of them frequently has no spare ways left.

This is the most common reason a consumer unit gets replaced in this borough — not failure, but capacity. It is worth identifying at the design stage of an extension rather than at second fix, when the board becomes an unbudgeted item on a project that is already running.

Larger properties and total demand

In the bigger housing around Totteridge, Mill Hill and Hampstead Garden Suburb, the question broadens. An EV charge point, electric heating, a substantial lighting load and outbuildings together can push a property towards the limit of what the existing supply arrangement comfortably supports.

Where that is likely, it is better assessed as a whole than circuit by circuit.

Converted flats

A significant share of Barnet's period housing has been converted into flats, and in those buildings the first task is establishing how the supply is actually divided — which board serves which dwelling, and where the boundary with the communal installation sits. Board work in a conversion without that is guesswork.

Before the board is changed

As everywhere, the testing beforehand determines how smoothly the replacement goes. A modern board with RCD protection will find faults an older board never reported, and it is far better to find them first.

Get in touch

Send a photograph of your board, or describe what is planned, and we will tell you what is likely to be involved.

Common questions

They are the same thing. "Fuse box" is the everyday term and "consumer unit" is the technical one. Both describe the board where the incoming supply is divided into circuits and protected. What has changed over the decades is how much protection that involves.

Related: Fuse Box / Consumer Unit Installation

More detail on this service is on the main Fuse Box / Consumer Unit Installation page, and everything we cover locally is listed on the Barnet area page.

Our own photography

Recent work

Full gallery
A newly installed consumer unit with the cover removed, showing neatly dressed earth, neutral and line conductors terminated into the busbars above two RCDs and a row of circuit breakers
New consumer unit, fully populated
An MK Sentry consumer unit with its cover open, showing a main switch, two RCDs and circuit breakers above a clearly labelled circuit chart
RCD-protected board with labelled circuits
A bedroom with a circular flush ceiling light and two wall-mounted uplighters casting warm light up and down the wall, with a bay window to the left
Bedroom lighting scheme
Two slim wall lights throwing light upwards and downwards onto a white wall, beneath a ribbed circular ceiling light
Wall uplighters and flush ceiling fitting

Call us

Speak to an electrician

Describe the fault or the job and we will tell you what is involved.

07832450917 Request a quote